Specify with confidence
APC’s certified, Australian-made seamless surfaces perfectly balance architectural vision with rigorous performance.
Specify with confidence
APC’s certified, Australian-made seamless surfaces perfectly balance architectural vision with rigorous performance.
EPO100T® Plain Coat System
Designed by All Purpose Coatings, the Plain Coat System stands out as the ultimate choice for chemical resistant floor coatings in high-traffic Educational Facilities. This Australian Made system excels where chemical resilience and hygiene are paramount. The Plain Coat System serves as a prime example of the innovation and durability inherent in All Purpose Coatings epoxy flooring solutions.
Features & Benefits
- Variable slip resistance profiles from P2 - P4 ratings according to AS4586 2013
- Critical radiant flux certified
- Can be rendered UV stable if required
- Easy Clean
- High Chemical Resistance
- Seamless Finish
- Good Abrasion resistance
- Suitable for pedestrian, vehicular and forklift traffic
- Unlimited colour range
- Easy Installation
- Good impact resistance
- Light reflective
- Low VOC
Typical Uses
- Commercial Areas
- Shopping Centres
- Amenities
- Education Facilities
- Common Areas
- Showrooms
- Medical Centres
- Veterinary Clinics
- Garages
- Government Buildings
- End of Trip Facilities
Technical Snapshot
Compressive Strength | > 50Mpa |
|---|---|
Abrasion Resistance | Excellent |
Bond Strength to Concrete | > 1.5Mpa |
Dry Heat Resistance | 120°C |
VOC | 27grams/litre, conforms to Green Star Design |
Fire Resistance | (kWm2) ≥ 11 |
Chemical Resistance | Good - the following chemicals are an example only, based on ambient temperature exposure. Consult APC for further information and any chemicals not listed below.
|
For Specifiers
"Floor coating system to be EPO100T® Plain Coat System as supplied by APC PTY LTD"
| Options | Standard | UV Top Coat |
|---|---|---|
Installation |
|
|
Thickness | 2-4mm | |
Slip Rating | P1-P5 based on additional Grip additives | |
Colour | Choose from any standard or AS 2700 Colour | |
Finish | Gloss (Matte finish available) | |
Standard Colours
N23 Neutral Grey
N43 Pipeline Grey
N64 Dark Grey
Y56 Merino
B41 Bluebell
Ultra Flake®
All Purpose Coatings is committed to producing top-quality products that are suitable for use in demanding environments with high levels of foot traffic. Our Ultra Flake Essential Finish System is designed to provide a long-lasting solution for areas that require exceptional durability, with features such as high chemical resistance, non-porous surfaces, and hard-wearing construction. Additionally, All Purpose Coatings manufactures and supplies all the products used in the Ultra Flake Essential Finish System, which is proudly designed and tested in Australia for Australian conditions.
Features & Benefits
- Seamless
- UV Stable
- Stone like decorative finish
- Easy to clean and maintain
- Variable slip resistance P2 - P5
- Excellent chemical resistance
- Wide range of colour blends
Typical Uses
- Residential Interiors
- Shopping Centres
- Entertainment Areas
- Commercial Showrooms
- Commercial Office Spaces
- Retail Showrooms
Technical Snapshot
Compressive Strength | > 50Mpa |
|---|---|
Abrasion Resistance | Excellent |
Bond Strength to Concrete | > 1.5Mpa |
Dry Heat Resistance | 120°C |
VOC | 27grams/litre, conforms to Green Star Design |
Fire Resistance | (kWm2) ≥ 11 |
Chemical Resistance | Good - the following chemicals are an example only, based on ambient temperature exposure. Consult APC for further information and any chemicals not listed below.
|
For Specifiers
"Floor coating system to be Ultra Flake® System as supplied by APC PTY LTD"
| Finish | Essential | Crystal | Diamond | Grip | Showroom |
|---|---|---|---|---|---|
Installation |
|
|
|
|
|
Thickness | 2-4mm | 2-4mm | 2-4mm | 2-4mm | 2-4mm |
Slip Rating | P2 | P2 | P2 | P3 - P4 | P3 |
Colour | Choose from a range of 40+ flake options and any standard or AS 2700 Colour | ||||
Finish | Gloss (Matte finish available) | ||||
Standard Colours
Hyper Flake®
The Hyper Flake Signature Series, Essential Finish is a modern, decorative and grout-free floor and wall system, suitable for both residential and commercial applications. The semi-textured finish is perfect for areas that require a lasting long-term solution. The system has many attributes including being trafficable, non-porous and hard-wearing while providing an alternative to polished concrete, that captures a natural stone finish. All products and systems are designed and formulated by APC and have a 20-year successful history of application in Australian Conditions.
Features & Benefits
- Seamless
- UV Stable
- Stone like decorative finish
- Easy to clean and maintain
- Variable slip resistance P2 - P5
- Excellent chemical resistance
- Wide range of colour blends
Typical Uses
- Change Rooms and Locker Areas
- Amenities (Toilets and Showers)
- Entryways and Foyers
- Corridors and Access Walkways
- Function Rooms and Club Rooms
- Canteen/Kiosk/Bar Areas
- Player Tunnels
- Gym/Training Spaces
- First Aid / Medical Rooms
Technical Snapshot
Compressive Strength | > 50Mpa |
|---|---|
Abrasion Resistance | Excellent |
Bond Strength to Concrete | > 1.5Mpa |
Dry Heat Resistance | 120°C |
VOC | 27grams/litre, conforms to Green Star Design |
Fire Resistance | (kWm2) ≥ 11 |
Chemical Resistance | Good - the following chemicals are an example only, based on ambient temperature exposure. Consult APC for further information and any chemicals not listed below.
|
For Specifiers
"Floor coating system to be Hyper Flake® System as supplied by APC PTY LTD"
| Finish | Essential | Crystal | Diamond | Grip | Showroom |
|---|---|---|---|---|---|
Installation |
|
|
|
|
|
Thickness | 2-4mm | 2-4mm | 2-4mm | 2-4mm | 2-4mm |
Slip Rating | P2 | P2 | P2 | P3 - P4 | P3 |
Colour | Choose from a range of 10+ flake options and any standard or AS 2700 Colour | ||||
Finish | Gloss (Matte finish available) | ||||
Standard Colours
Quartz Shield®
The Quartz Shield System has a number of attributes that make this an ideal choice for areas that require a long term slip-resistant solution, including high chemical resistance, trafficability, non-porous and hard-wearing. Quartz Shield brings a decorative floor to an industrial system via a range of modern colours. The Quartz Shield System is manufactured and supplied by All Purpose Coatings in Australia. All products and systems are designed and tested in Australia for Australian conditions.
Features & Benefits
- Seamless
- UV Stable
- Stone like decorative finish
- Easy to clean and maintain
- Variable slip resistance P2 - P5
- Excellent chemical resistance
- Wide range of colour blends
Typical Uses
- Commercial kitchens
- Amenities
- Education facilities
- Abattoirs
- End of trip facilities
- Food prep areas
- Loading docks
Technical Snapshot
Compressive Strength | > 50Mpa |
|---|---|
Abrasion Resistance | Excellent |
Bond Strength to Concrete | > 1.5Mpa |
Dry Heat Resistance | 120°C |
VOC | 27grams/litre, conforms to Green Star Design |
Fire Resistance | (kWm2) ≥ 11 |
Chemical Resistance | Good - the following chemicals are an example only, based on ambient temperature exposure. Consult APC for further information and any chemicals not listed below.
|
For Specifiers
"Floor coating system to be Quartz Shield® System as supplied by APC PTY LTD"
| Options | Quartz 40 | Quartz 25 |
|---|---|---|
Installation |
|
|
Thickness | 2-4mm | 2-4mm |
Slip Rating | P3 | P4 - P5 |
Colour | Choose from a range of 5+ quartz options and any standard or AS 2700 Colour | |
Finish | Gloss | |
Standard Colours
Matrix System
The Epoxy Matrix System is ideally used within commercial and industrial spaces as a trafficable long-term floor coating solution. The system is a hygienic, slip-resistant, chemical-resistant, and Australian standard system. All products and systems are designed and formulated by APC and have a 20-year successful history of application in Australian Conditions.
Features & Benefits
- Seamless
- UV Stable
- Stone like decorative finish
- Easy to clean and maintain
- Variable slip resistance P2 - P5
- Excellent chemical resistance
- Wide range of colour blends
Typical Uses
- Chemical bunds
- Water treatment
- Washdown bays
- Government buildings
- Shopping centres
- Commercial areas
Technical Snapshot
Compressive Strength | > 50Mpa |
|---|---|
Abrasion Resistance | Excellent |
Bond Strength to Concrete | > 1.5Mpa |
Dry Heat Resistance | 120°C |
VOC | 27grams/litre, conforms to Green Star Design |
Fire Resistance | (kWm2) ≥ 11 |
Chemical Resistance | Good - the following chemicals are an example only, based on ambient temperature exposure. Consult APC for further information and any chemicals not listed below.
|
For Specifiers
"Floor coating system to be Quartz Shield® System as supplied by APC PTY LTD"
| Options | Quartz 40 | Quartz 25 |
|---|---|---|
Installation |
|
|
Thickness | 2-4mm | 2-4mm |
Slip Rating | P3 | P4 - P5 |
Colour | Choose from any standard or AS 2700 Colour | |
Finish | Gloss | |
Standard Colours
N23 Neutral Grey
N43 Pipeline Grey
N64 Dark Grey
Y56 Merino
B41 Bluebell
Cut & Coat System
The Cut & Coat System is a water based topical Urethane coating system that provides a modern alternative for residential and commercial spaces. The system has many attributes including, non-porous & hard-wearing while being easy to clean. All products & systems are designed and formulated by APC and have a 20-year successful history of application in Australian Conditions.
Features & Benefits
- Seamless
- UV Stable
- Stone like decorative finish
- Easy to clean and maintain
- Variable slip resistance P2 - P5
- Excellent chemical resistance
- Wide range of colour blends
Typical Uses
- Internal Systems
- Government Buildings
- Education Facilities
- External Systems
- Showrooms
- Commercial Spaces
- Retail Stores
- Bars and Clubs
- Restaurants
Technical Snapshot
Compressive Strength | > 50Mpa |
|---|---|
Abrasion Resistance | Excellent |
Bond Strength to Concrete | > 1.5Mpa |
Dry Heat Resistance | 120°C |
VOC | 27grams/litre, conforms to Green Star Design |
Fire Resistance | (kWm2) ≥ 11 |
Chemical Resistance | Good - the following chemicals are an example only, based on ambient temperature exposure. Consult APC for further information and any chemicals not listed below.
|
For Specifiers
"Floor coating system to be Cut & Coat System as supplied by APC PTY LTD"
| Options | Liquathane | Tetrathane |
|---|---|---|
Installation |
|
|
Thickness | ||
Slip Rating | ||
Colour |
| |
Finish | Gloss (Matte available) | Gloss |
Case Studies
Greencross Pty Ltd Petbarn
Cut & Coat System Liquathane®
Applied by Prep & Finish Flooring
Commercial
Fraser Coast Sports Precinct
Ultra Flake® Ice (S) on EPO100T® N14 White with Lollipop Purple Highlights
Applied by C.N.R.C Epoxy Flooring
CommercialVideo
Keep an eye on this space as we release more Case Studies from our Commercial Development Team!
Book a Consultant
Need help choosing the right system? Have one of our consultants contact you for tailored advice, technical support, and project specific solutions. Simply fill out the form below, and a member of our team will be in touch shortly.
